◆ Suitable For : Dry Film,Wet Film,Solder Mask

◆ High Resolution: 75μm

◆ High Resolution 3mi/3mil(75um/75um).

◆ English And Russian Operating System

◆ Use High Precision HINWIN Linear Guide

◆ Spindle Speed 60000rpm

◆ Real-Time Off-Hole Monitoring

◆ Automatic Loading And Unloading

◆ Increase Efficiency And Improve Quality

This is an automatic copper thickness inspection machine, which is a general test machine for the thickness of copper foil on the surface of the circuit board. It is suitable for PCB surface copper thickness detection after electroplating copper.

1.The inspection speed of the equipment is 4m/min, 8m/min, 12m/min, and 16m/min
2.Carry out single line inspection at the speed of 8m/min according to the size of 720*720mm (the detection spacing of the board is 80), and the production capacity is 600 pieces/hour by calculation

◆Application :PE,PVC,PET,OPP, FPC,Film
◆High Level Digital Image System, Can Be Carried Out Against Various Targets Such As Copper Foil, Original Paint, Tin-Spray, Gold-Plated, Nickel-Plated,Etc
◆Image Integrated Positioning And Edge Integrated Positioning
◆L.P.I Empty Screen Printing,Each Piece Of Printing Can Set The Integration Table'sX-Y Axis Displacement Distance To Prevent Excessive Accumulation Of Ink Caused By Ink Accumulation In The Hole

Director arm plate thickness tester is mainly used for copper clad laminate and multi-layer laminate thickness measurement, as well as other plate thickness measurement. High precision Japanese original imported Mitutoyo dial meter, can be measured data for a full range of process control data analysis.